Loading... Please wait...

The Good Stuff

Add to Wish List

Click the button below to add the Hudson & Allen Studio - Waffen SS Division, Northwest Europe, 1944-45 - 1:16th Scale Decal to your wish list.

Hudson & Allen Studio - Waffen SS Division, Northwest Europe, 1944-45 - 1:16th Scale Decal

  • Image 1
HAA - 9901

Product Description

1/16th scale

Anyone who has ever used water slide decals is familiar with the procedure for using 
HUDSON & ALLEN decals.  The area to receive the decal should be coated with a clear gloss to give a 
good surface for the decal to adhere to. This will also help hide the decal film. After consulting your 
references to determine the decals correct placement, carefully cut the desired part out of the decal sheet. 
Soak the decal in warm water until the decal can be easily slid off the paper backing. Do not slide the 
decal off the paper backing until you have removed the decal and paper backing from the water and are 
ready to position the decal. You may wish to moisten the area of the model that is to receive the decal.  
You may also wish to use one of several decal setting solutions to help the decal lie flat on the model 
and to conform to the surface of any curves or wrinkles.  Now carefully slide the decal from the paper 
backing and onto the model. Discard the paper backing and gently pat the excess water from the surface 
of the decal and model using a cotton swab, a lint free cloth or a piece of tissue. While patting the decal
and model make sure that no air bubbles are trapped under the surface of the decal. If air bubbles are 
present, carefully work them to the edge of the decal and out from under it. Be careful not to push them
back into place. Wait at least 24 hours before handling your model to proceed to the next step.  
    After the decals are completely dry, they should be covered with a clear flat paint to protect
the decal and to hide the decal carrier film. We have chosen to manufacture our decals using the
thinnest film possible but you still must build up a thin layer of clear flat thick enough to hide the 
carrier or the effect of having camouflage printed on the fabric will be lost. With a little patience and a 
little practice you will soon be comfortable with the process and be producing beautifully decaled