Loading... Please wait...

The Good Stuff

Add to Wish List

Click the button below to add the Mission Models - US Army Olive Drab - FS 31090 to your wish list.

Mission Models - US Army Olive Drab - FS 31090

  • Image 1
MMP - 024

Product Description

1 oz. bottle of acrylic paint.

All paints are airbrush ready. By nature all paint may vary in consistency based on pigment. You may find some paints to be slightly thicker than others which are natural properties of paint. There are not any additional additives to the paints which results in no shelf life , hard settles or breakdown. 

MMP paint is very easy to use. Thinning to the following recommended ratio offers the best performance. Below are some basic examples. For best performance please follow these carefully researched ratios.

DO NOT MIX 50/50. The thinner is very powerful and only the smallest amount of thinner is needed. In the mixing cup your reduced paint will appear thicker than what you may be used to. This is normal. MMP paint will dry smooth, thin and level. It will not hide the finest of details. Mixed properly you will find a beautiful opaque finish which requires minimal coats.

All paint should be stirred not shaken in the paint cup. 

Polyurethane Intermix 

1-2 drops to 10 drops paint ( Stir in only do not shake ) 

2-4 drops to 20 drops paint ( stir in only do not shake )

Thinner / Reducer

20/30% MMP thinner to 1 part paint ( 2/3 drops thinner to 10 drops paint)

20/30% MMP thinner to 2 part paint ( 2/3 drops thinner to 20 drops paint ) 

PSI 10 , 15 , 20 depending on your needs. 

TIP: add one or two drops of MMP Polyurethane Intermix for additional reduced tip dry when spraying straight from the bottle. MMP Poly increases flow , lowers drying times , added leveling , increased blending when brush painting, durability and adds a slight eggshell finish. 

Find Similar Products by Category