Kits World Decals - 3D Human Eyeballs Waterslide Decals 01

Kits World Decals - 3D Human Eyeballs Waterslide Decals 01

Suitable for Scales 1/35th to 1/16th.

Sizes - 0.72mm, 0.85mm, 0.95mm, 1.10mm

168 total pair of eyes in 4 sizes.

336 HUMAN EYEBALLS DECALS.
Size 1.5mm 84 eyeballs - 42 pairs.
Size 1.72mm 84 eyeballs - 42 pairs.
Size 1.8mm 84 eyeballs - 42 pairs.
Size 1.92mm 84 eyeballs - 42 pairs.

Treat these decals as you would any other silk screen printed water-slide decal when it comes to surface preparation.

1. Ensure the surfaces are glossy and smooth
2. It is not necessary to use any decal setting agents, in fact we advise against it.
3. Should you require additional adhesive, we recommend using diluted PVA (White) glue applied with a small brush to the surface the decal will be applied to.
4. Carefully maneuver the decal into place using a soft brush, bamboo tweezers or even a toothpick. DO NOT USE Metal Tweezers.
5. If you want to draw the decal closer and conform more to the surface a decal softening solution can be applied sparingly. DO NOT MOVE the decal after the softener has been applied. As with any other decal, this will cause it to tear. Leave the decal for at least 45 minutes after softener has been applied.
6. Should you want to weather the decals we recommend applying gloss varnish over top. This will also help seal the decal into place.


Full colour. No painting required. Easy to fit. Apply as any other decals, NO Superglue required!